Studio Monitors

Key Features

• 5.25″ woven composite woofer
• 1″ silk‑dome tweeter
• Amplification 80W Class AB bi‑amped design (per speaker)
• Frequency Response 48 Hz – 20 kHz (extended low‑end compared to smaller Eris models)
• Maximum SPL 102 dB
• Waveguide: Custom‑designed EBM (Elliptical Boundary Modeled) waveguide for a wide sweet spot and superior stereo imaging
• Inputs: Balanced XLR, balanced ¼” TRS, unbalanced RCA
• Controls: Acoustic tuning (high/low EQ) for room adjustment

Key Features

• 4.5″ woven composite low‑frequency driver
• 1″ silk‑dome tweeter
• Amplification 25W per speaker (50W total, Class AB bi‑amped design)
• Frequency Response: 70 Hz – 20 kHz
• Balanced ¼” TRS
• Unbalanced RCA
• ⅛” stereo aux input
• Bluetooth 5.0 wireless streaming
• Headphone output (front panel)
• Volume knob (front panel)
• Acoustic tuning controls (high/low EQ) on the rear pane

Key Specs & Features

• 8‑inch optimized paper woofer (LF) and 1‑inch soft‑dome tweeter (HF)

  85 dB continuous output at 2.8 m, with 20 dB headroom; Max SPL ≈ 114 dB; some sources indicate up to 117 dB.

  Features a 3‑D imaging waveguide for superb stereo imaging.

• Balanced XLR and TRS, plus unbalanced RCA with switchable sensitivity for consumer gear compatibility.
• 16.5″ H × 10″ W × 11.25″ D; weight: ~19.8 lb (9 kg) each

Key Technical Specifications

• Amplification: 70 W RMS for the woofer, 20 W RMS for the tweeter; bi-amped Class‑D design (~90 W total)

• Frequency Response: Approximately 33 Hz to 25 kHz (–6 dB), with particularly strong low-end extension.

• Crossover Frequency: Around 2.6 kHz, managed via a DSP‑based network.

• Max SPL: Reaches up to 118 dB SPL per pair at 1 m, offering substantial headroom for dynamic sources.

• Inputs & Controls: Balanced XLR and unbalanced RCA inputs, plus rear-panel ±2 dB high/low shelving filters and gain trim.

• Physical Dimensions: ~400 × 250 × 335 mm (HxWxD), ~9.8 kg (21.6 lb) per monitor; 5‑year warranty when registered

Key Specifications & Overview

• Configuration: Bi-amped active 2‑way monitors with a 5″ woofer and 1″ silk-dome tweeter

• Amplification: 150 W total per monitor using Class‑D amps (~75W per driver likely)

• Frequency Response: 55 Hz – 20 kHz

• Max SPL: Around 100 dB.

• Inputs: USB-B digital input, plus balanced XLR and TRS analog inputs that can be used simultaneously.

• Controls: Volume knob and tweeter gain switch (flat, -4 dB, -2 dB, +2 dB) for tonal adjustment.

• Build: Ported MDF cabinet with ABS/plastic front baffle; dimensions approximately 254×204×178 mm, weight ~6.5 kg each.

• Extras: Proprietary speaker-link cable included; no RCA inputs or analog interconnects; no USB cable provided.